This is early build [WIP] but now you can use this rom as daily driver. The Development of CM13 Marshmallow is on fire frequent updates and developers trying hard to make it stable.
Added
Working SuperSu Link
Working Busy Box
What's NEW!
[R30 Changelog]
Update kernel to LA.BF.1.1.3_rb1.13
Fix LiveDisplay (color calibration)
Enable ZCACHE
Review
Rom is Smooth and App response time is less. For Battery backup you can't expect more than in cm12.1 it's same.
Bug :
Alarm doesn't wake up the device if it's off.
Sometimes front camera fails and a reboot is required to make it work again.
fefifofum, Kra1o5, Luffy.d, TheStrix, rebelos, onano CyanogenMod
Status: Testing
Current Version: R30
Last Updated 2016-05-25
Source : http://forum.xda-developers.com/redmi-1s/orig-development/cyanogenmod-13-0-t3265044
Added
Working SuperSu Link
Working Busy Box
What's NEW!
[R30 Changelog]
Update kernel to LA.BF.1.1.3_rb1.13
Fix LiveDisplay (color calibration)
Enable ZCACHE
Review
Rom is Smooth and App response time is less. For Battery backup you can't expect more than in cm12.1 it's same.
Bug :
Alarm doesn't wake up the device if it's off.
Sometimes front camera fails and a reboot is required to make it work again.
Download Rom and Gapps and Firmware
Build R26
Build R25
Build R22
Build R21
Build R20
Build R19
Build R18
Build R17
Build R16
Build R15
Build R14
Build R13
Build R12
Build R11
Build R10
Build R9
Build R8
Build R7
Build R6
Build R5
Build R4
Build R3
Build R2
Build R25
Build R22
Build R21
Build R20
Build R19
Build R18
Build R17
Build R16
Build R15
Build R14
Build R13
Build R12
Build R11
Build R10
Build R9
Build R8
Build R7
Build R6
Build R5
Build R4
Build R3
Build R2
How to Flash this ROM
[Always backup your current ROM]
1. Reboot into recovery (How to flash TWRP Recovery).
2. Wipe Data, System and Cache, Dalvik Cache
3. Now Flash ROM and then Gapps.
4. Flash ROM Firmware 7.0.5.0 [No wipe Required]
5. Reboot.
How to Flash from previous cm 13.0 ROM
1. Reboot into recovery.
2. Wipe Cache and Dalvik Cache if you're updating from a previous version of CM 13.0
3. Flash ROM and Gapps.
4. Reboot.
How to Enable Root Access?
This ROM is pre-rooted
developer options = root access = apps only
(Tap build number in setting = About to enable developer option)
if you want to flash supersu then download this supersu.zip and flash from recovery.
Working BusyBox?
Download Busybox on rails Grant Root Access Make sure you are connected to Wifi or Data Click Next - Next Done Reboot Once.FAQ
1. Where are Developer options and Performance settings?
Go to Settings > About phone and press five times on Build number.
2. How to enable root access?
Go to Settings > Developer options > Root access and enable it for apps, adb or both. [as per your preference]
3. How can I set 3G only network mode?
Open dialer, dial *#*#4636#*#* , open first option "Phone Information", there you can set your preferred network mode.
4. Why is cpu min freq raising to 1190MHz?
CM 12.1 have touch boost configuration cpu min freq increases when you touch the screen to give a better response. When you don't touch the screen for a couple of seconds, cpu min freq goes back to 300MHz to save battery power.
5. When I configure the sdcard as external storage, it says I need to format it.
Only fat32 works for sdcard, if you have a different fs you'll need to format it. If it still says your sdcard is corrupted, you need to reboot into recovery and delete the .android_secure folder found in external sdcard.
This is not my work credit goes to :[Always backup your current ROM]
1. Reboot into recovery (How to flash TWRP Recovery).
2. Wipe Data, System and Cache, Dalvik Cache
3. Now Flash ROM and then Gapps.
4. Flash ROM Firmware 7.0.5.0 [No wipe Required]
5. Reboot.
How to Flash from previous cm 13.0 ROM
1. Reboot into recovery.
2. Wipe Cache and Dalvik Cache if you're updating from a previous version of CM 13.0
3. Flash ROM and Gapps.
4. Reboot.
How to Enable Root Access?
This ROM is pre-rooted
developer options = root access = apps only
(Tap build number in setting = About to enable developer option)
if you want to flash supersu then download this supersu.zip and flash from recovery.
Working BusyBox?
Download Busybox on rails Grant Root Access Make sure you are connected to Wifi or Data Click Next - Next Done Reboot Once.FAQ
1. Where are Developer options and Performance settings?
Go to Settings > About phone and press five times on Build number.
2. How to enable root access?
Go to Settings > Developer options > Root access and enable it for apps, adb or both. [as per your preference]
3. How can I set 3G only network mode?
Open dialer, dial *#*#4636#*#* , open first option "Phone Information", there you can set your preferred network mode.
4. Why is cpu min freq raising to 1190MHz?
CM 12.1 have touch boost configuration cpu min freq increases when you touch the screen to give a better response. When you don't touch the screen for a couple of seconds, cpu min freq goes back to 300MHz to save battery power.
5. When I configure the sdcard as external storage, it says I need to format it.
Only fat32 works for sdcard, if you have a different fs you'll need to format it. If it still says your sdcard is corrupted, you need to reboot into recovery and delete the .android_secure folder found in external sdcard.
fefifofum, Kra1o5, Luffy.d, TheStrix, rebelos, onano CyanogenMod
Status: Testing
Current Version: R30
Last Updated 2016-05-25
Source : http://forum.xda-developers.com/redmi-1s/orig-development/cyanogenmod-13-0-t3265044
ConversionConversion EmoticonEmoticon